Description
The Auto Charge WP Kit includes a Charger, a Display and WP Auto Eject. The WP Auto Eject is recommended for installations where the rear of the Auto Eject is protected from the weather. This kit provides a complete vehicle charging system at an affordable price.
The WP Auto Eject comes complete with Weatherproof Cover and Mating Connector. Please specify color cover when ordering. WP Auto Eject Covers Color choices are Yellow, Blue, Red, White, Gray, and Black. Yellow will be supplied if not specified.
Please note: The kit pictured to the left is for the 51-02-1106 only. This kit is the bundled products below. Click on the Bundle/Part Numbers below to view the specifications of each product:
Please specify options when ordering:
WP Auto Eject:The 091-20WP-120, 20 Amp WP Auto Eject, is supplied in this kit. The 091-18WP-120, 15 Amp WP Auto Eject, can be substituted, with no additional cost.
Auto Charge 2000 PLC
- 18A total: 15A battery charger, 3A battery saver
- Microprocessor controlled, completely automatic operation regulates the output to a dual battery bank
- Precision voltage controller senses battery voltage, eliminating the need for sense wires
- Parasitic Load Compensation allows for user input of total accessory load amps on the vehicle. This allows the charger to shift the absorption stage set point so the battery voltage drops to the float voltage when desired current is reached
- Battery Type Selection Switches: Lead-Acid, Gel Cell, AGM or Odyssey
- Float / 3-Step Charge Mode Selection Switches
- 3 year warranty
| Remote Sensing | Electronic, Sense Lines Not Required |
| Charger, Output Amperage | 15 |
| Battery Saver | Yes |
| Chargers With Parasitic Load Compensation | Yes |
| Chargers With Remote Display Options | Yes |
| Charger, Output Voltage VDC | 12 |
| Charger, Input Voltage VAC | 120 |
| Charger- Hz | 60 |
| International | No |
| Charger, Low Profile Design | No |
| Charging Profile | Both |
| Input Fuse | 6 Amps, Fast Blow |
| Input | 120 Vac, 60 Hz, 3.5 Amps Max |
| Output | Battery: 12 Vdc, 15 Amps (18 Amps If Battery Saver Is Turned Off) |
| Output Fuse | 40 Amps (Part Number: 090-0040-0) |
| Warranty | 3 Years |
| Weight | 11 Lbs |
| Battery Type Selection Switches | Lead-Acid, Gelled Electrolyte (Gel Cell), AGM Or Odyssey |
| Power LED Status Indicator | Green LED, Indicates 120 Volt AC Power Applied |
| System LED Status Indicator | Yellow LED, See Instruction Manual For Details |
| Torque | DC Output Connector 15 In/Lbs |
| Output Power | Battery Saver: 13 Vdc, 3 Amps |
| Remote Display | Dual Bar Graph Display |
| EV Series | No |
Auto Eject 20 WP
- 120 Volts AC, 20 Amps
- Automatically disconnects shoreline
- Designed specifically for emergency vehicles
- Eliminates broken shoreline
- 2 year warranty
- Default color for cover is yellow
The Auto Eject WP is a power input connector designed to be mounted in the side of a vehicle to permit connecting 120 Volt AC shoreline. It comes with a weatherproof cover. The cover is spring loaded to close, preventing water from entering when the shoreline is not connected. A solenoid wired to the vehicle’s starter, is energized when the engine is cranked. This instantaneously drives the plug from the receptacle. This simple, reliable device, eliminates forever the broken cables which result when drivers forget to remove the shoreline before driving away.
Optional Accessories:
Dynamic Disconnect 091-18-098
EZ Mounting Plate 091-185-010
Enclosure 091-18CP
Reviews
There are no reviews yet.