Description

The Auto Charge Pump Super Kit includes a Charger, a Display, an Auto Pump AC, and a 20 Amp Super Auto Eject. This kit provides a complete vehicle charging system at an affordable price.

The Super Auto Eject comes complete with Weatherproof Cover and Mating Connector. Please specify color cover when ordering. Weatherproof Cover Color choices are Yellow, Blue, Red, White, Gray, and Black. Yellow will be supplied if not specified.

Please Note: The kit pictured to the left is for the 54-27-1106 only. This kit is the bundled products below. Click on the Bundle/Part Numbers below to view the specifications of each product.

Please specify options when ordering:

Auto Pump: The 091-9B-1, Auto Pump AC, is supplied in this kit. The 091-9B-1-AD, Auto Pump AC with Auto Drain, can be substituted, at an additional cost.
Auto Eject:
The 091-55-20-120, 20 Amp Super Auto Eject, is supplied in this kit. The 091-55-15-120, 15 Amp Super Auto Eject, can be substituted, with no additional cost.
The 091-55-20-120, 20 Amp Super Auto Eject, is a side wire Auto Eject. In some cases, space on the sides of the unit is limited. The 091-55-20-120-BW, 20 Amp Super Auto Eject, Back Wire, can be substituted, at an additional cost

Auto Pump AC

100 PSI Max Rating, 120V, 4A
Vehicle mount compressor ensures air brake system is properly pressurized for immediate truck departure from station
Pressure switch regulated operation automatically senses low pressure in air system and restores proper pressure, preventing brake lock-up
Pressure switch regulated operation
No interference with engine mounted air compressor
Factory set PSI actuation points: 75 “On”, 95 “Off” with Adjustment differential 20 PSI
Sealed ball bearings for long service life
Compact size
2-year�warranty
Part # 091-9B-4 replaces part # 091-9B-1

The Auto Pump AC is a 120-volt 60 Hz shaded pole A.C. motor operating a single cylinder air compressor designed specifically for installation on vehicles with air brakes. �During long idle periods of the vehicle, when even the slightest seepage can cause an air brake system pressure to drop below the brake lockup pressure, the Auto Pump AC automatically starts to maintain the pressure.

The Auto Pump AC motor is directly coupled to the compressor section eliminating all belts and pulleys and assuring long life and reliable operation. A heavy-duty pressure switch is adjusted to start the compressor when the system pressure drops below 75 PSI and stops the compressor when 95 PSI is attained. The startup pressure is field adjustable – the pressure differential between start up and stopping is fixed. The moisture trap provided permits routine draining of accumulated moisture in the Auto Pump output line.

PSI	100
Input Voltage	120
Orientation	Horizontal
Input	120 Volts A.C., 50/60 Hz, 1.8 Amps
Output	1.0/1.3 CFM, Open Flow, 100 PSI Max
Warranty	2 Year
Weight	15 Lbs
Motor Type	Shaded Pole AC
Motor Horsepower	1/8 HP
Pressure Switch	Adjustable Set Point-Factory Set To 75 PSI Cut-In, 95 PSI Cut-Out Factory Set To 75 PSI Cut-In, 95 PSI Cut-Out
Outlet Connection	1/4 NPT, Female