Description
The Pump Plus Super Kit includes a Charger, a Display, an Auto Pump 12V and a Super Auto Eject. This kit provides a complete vehicle charging system at an affordable price.
The Super Auto Eject comes complete with Weatherproof Cover and Mating Connector. Please specify color cover when ordering. Weatherproof Cover Color choices are Yellow, Blue, Red, White, Gray, and Black. Yellow will be supplied if not specified.
Please specify options when ordering:
Auto Pump: The 091-9-12V, Auto Pump AC, is supplied in this kit. The 091-9-12V-AD, Auto Pump AC with Auto Drain, can be substituted, at an additional cost.
Super Auto Eject:
The 091-55-20-120, 20 Amp Super Auto Eject, is supplied in this kit. The 091-55-15-120, 15 Amp Super Auto Eject, can be substituted, with no additional cost.
The 091-55-20-120, 20 Amp Super Auto Eject, is a side wire Auto Eject. In some cases, space on the sides of the unit is limited. The 091-55-20-120-BW, 20 Amp Super Auto Eject, Back Wire, can be substituted, at an additional cost.
Pump Plus 1200 Auto Charge (Gen2)
- NEW with Parasitic Load Compensation (PLC) allows for user input of total accessory load amps on the vehicle.This allows the charger to shift the absorption stage set point so the battery voltage drops to the float voltage when desired current is reached
- NEW Patented PLC technology
- NEW Lightweight, small low profile size
- Output voltage regulated
- Accommodates Lead-Acid, Gelled Electrolyte,
AGM and Odyssey® battery types - Selectable 1, 5 or 10 hour Safety Timer while in 3- Step mode
- Adjustable Parasitic Load Compensation
(5-35 amperes) - Compatible with Super Auto Eject with Deluxe Cover 091-55-234-XXX (Bar Graph Display) or
091-55-194-XXX (Digital Display) - 3 year warranty
Specifications
| Charger, Output Amperage | 40 |
| Chargers With Parasitic Load Compensation | Yes |
| Charger With Remote Display Included | Yes |
| Charger- Hz | 50/60 |
| Charger, Low Profile Design | Yes |
| Input Fuse | 8A, Fast Blow |
| Input | 120 Volts AC, 50/60 Hz, 6Amps |
| Output | 12 Vdc, 40 Amps |
| Weight | 7 Lbs |
| Output Power | (Bat) 12 Volts DC. 40 Amps Max |
| Remote Display | 3 Options: Bar Graph, Status Center, Or Status Center In Watertight Case |
| EV Series | No |
Auto Pump 12 Volt
- 100 PSI Max Rating, 12V, 11A
- Vehicle mount compressor ensures truck air brake system is properly pressurized for immediate dispatch from station
- Pressure switch regulated operation automatically senses low pressure in air system and restores proper pressure, preventing brake lock-up
- No interference with engine mounted air compressor
- Factory set PSI actuation points: 75 “On”, 95 “Off” with Adjustment differential 20 PSI
- Sealed ball bearings for long service life
- Compact size
- 2 year warranty
Specifications
| PSI | 100 |
| Input Voltage | 12 |
| Orientation | Horizontal |
| Input | 12 Vdc @ 11 Amps Max |
| Output | .30 SCFM @ 80 PSI; .35 SCFM @ 60 PSI |
| Warranty | 2 Year |
| Weight | 6 Lbs |
| Motor Type | Perm. Magnet .10 HP |
| Pressure Switch | Adjustable Set-Point; Factory Set To 75 PSI Cut-In, 95 PSI Cut-Out |
Super Auto Eject
- 120 Volts AC, 20 Amps
- Automatically disconnects shoreline
- Completely sealed
- Designed specifically for emergency vehicles
- Eliminates broken shoreline
- 2 year warranty
- Can use a Standard Waterproof Cover, Deluxe Bar Graph or Deluxe Digital Display
- Default color for covers is yellow
The Super Auto Eject is a completely sealed automatic power line disconnect. This prevents contamination of the mechanism by road dirt, and ensures long reliable life even when mounted in the most severe environment. A novel internal switch arrangement closes and opens the 120 Volt A.C. circuit after the mating connector is inserted, and before the connector is removed. This eliminates arcing at the connector contacts, and assures long contact life. As with all Auto Ejects, the Super Auto Eject is connected to the starter circuit, so that ejection occurs when the engine is cranked.
Reviews
There are no reviews yet.