Description
The Auto Charge Super Kit includes a Charger, a Display and a Super Auto Eject. This kit provides a complete vehicle charging system at an affordable price.
The Super Auto Eject comes complete with Weatherproof Cover and Mating Connector. Please specify color cover when ordering. Weatherproof Cover Color choices are Yellow, Blue, Red, White, Gray, and Black. Yellow will be supplied if not specified.
Please note: The charger pictured to the left is for the 52-03-4406 only. This kit is the bundled products below. Click on the Bundle/Part Numbers below to view the specifications of each product:
Please specify options when ordering:
Auto Eject:
The 091-55-20-120, 20 Amp Super Auto Eject, is supplied in this kit. The 091-55-15-120, 15 Amp Super Auto Eject, can be substituted, with no additional cost.
The 091-55-20-120, 20 Amp Super Auto Eject, is a side wire Auto Eject. In some cases, space on the sides of the unit is limited. The 091-55-20-120-BW, 20 Amp Super Auto Eject, Back Wire, can be substituted, at an additional cost.
Auto Charge 1000 PLC
- 18A total: 15A battery charger, 3A battery saver
- Microprocessor controlled, completely automatic operation regulates output to a single battery bank
- Precision voltage controller senses battery voltage, eliminating need for sense wires
- Parasitic Load Compensation allows for user input of total accessory load amps on the vehicle. This allows the charger to shift the absorption stage set point so the battery voltage drops to the float voltage when desired current is reached
- Battery Type Selection Switches: Lead-Acid, Gel Cell, AGM or Odyssey
- Float / 3-Step Charge Mode Selection Switches
- Compatible with Super Auto Eject with Deluxe Cover 091-55-234-XXX (Bar Graph Display) or 091-55-194B-XXX (Digital Display)
- Compatible with Super Auto Eject with Deluxe Cover 091-55-234-XXX (Bar Graph Display) or 091-55-194B-XXX (Digital Display)
- 3 year warranty
Specifications
| Remote Sensing | Electronic, Sense Lines Not Required |
| Charger With Battery Bank | Single |
| Charger, Output Amperage | 15 |
| Battery Saver Only | No |
| Battery Saver | 3 |
| Chargers With Parasitic Load Compensation | Yes |
| Charger With Remote Display Included | NO |
| Charger, Output Voltage VDC | 12 |
| Charger, Input Voltage VAC | 120 |
| Charger- Hz | 60 |
| International | No |
| Charger, Low Profile Design | No |
| Charging Profile | Float |
| Input Fuse | 6 Amps, Fast Blow |
| Input | 120 Vac, 60 Hz, 3.5 Amps Max |
| Output Fuse | 40 Amps (Part Number: 090-0040-0) |
| Warranty | 3 Years |
| Weight | 11 Lbs |
| Charge Indicator Options | Remote Bar Graph Display, Deluxe Status Center, Or Watertight Status Center |
| Battery Type Selection Switches | Lead-Acid, Gelled Electrolyte (Gel Cell), AGM Or Odyssey |
| Power LED Status Indicator | Green LED, Indicates 120 Volt AC Power Applied |
| System LED Status Indicator | Yellow LED, See Instruction Manual For Details |
| Torque | DC Output Connector 15 In/Lbs |
| Output Power – Battery Saver | 13 Vdc, 3 Amps |
| Output Power – Battery | 12 Vdc, 15 Amps (18 Amps If Battery Saver Is Turned Off) |
| EV Series | No |
Super Auto Eject
- 120 Volts AC, 20 Amps
- Automatically disconnects shoreline
- Completely sealed
- Designed specifically for emergency vehicles
- Eliminates broken shoreline
- 2 year warranty
- Can use a Standard Waterproof Cover, Deluxe Bar Graph or Deluxe Digital Display
- Default color for covers is yellow
The Super Auto Eject is a completely sealed automatic power line disconnect. This prevents contamination of the mechanism by road dirt, and ensures long reliable life even when mounted in the most severe environment. A novel internal switch arrangement closes and opens the 120 Volt A.C. circuit after the mating connector is inserted, and before the connector is removed. This eliminates arcing at the connector contacts, and assures long contact life. As with all Auto Ejects, the Super Auto Eject is connected to the starter circuit, so that ejection occurs when the engine is cranked.
Reviews
There are no reviews yet.