Overview
The Pump Plus Kit includes a Charger, a Display and an Auto Pump 12V. This kit provides a complete vehicle charging system at an affordable price.
Please note: The kit pictured to the left is for the 53-21-1100 only. This kit is the bundled products below. Click on the Bundle/Part Numbers below to view the specifications of each product:
Please specify options when ordering:
- Auto Pump: The 091-9-12V, Auto Pump AC, is supplied in this kit. The 091-9-12V-AD, Auto Pump AC with Auto Drain, can be substituted, at an additional cost
Pump Plus 1200 Auto Charge (Gen2)
- NEW with Parasitic Load Compensation (PLC) allows for user input of total accessory load amps on the vehicle. This allows the charger to shift the absorption stage set point so the battery voltage drops to the float voltage when desired current is reached
- NEW Patented PLC technology
- NEW Lightweight, small low profile size
- Output voltage regulated
- Accommodates Lead-Acid, Gelled Electrolyte,
AGM and Odyssey® battery types - Selectable 1, 5 or 10 hour Safety Timer while in 3- Step mode
- Adjustable Parasitic Load Compensation
(5-35 amperes) - Compatible with Super Auto Eject with Deluxe Cover 091-55-234-XXX (Bar Graph Display) or
091-55-194-XXX (Digital Display) - 3 year warranty
Specifications
Charger, Output Amperage | 40 |
Chargers With Parasitic Load Compensation | Yes |
Charger With Remote Display Included | Yes |
Charger- Hz | 50/60 |
Charger, Low Profile Design | Yes |
Input Fuse | 8A, Fast Blow |
Input | 120 Volts AC, 50/60 Hz, 6Amps |
Output | 12 Vdc, 40 Amps |
Weight | 7 Lbs |
Output Power | (Bat) 12 Volts DC. 40 Amps Max |
Remote Display | 3 Options: Bar Graph, Status Center, Or Status Center In Watertight Case |
EV Series | No |
Auto Pump 12 Volt
- 100 PSI Max Rating, 12V, 11A
- Vehicle mount compressor ensures truck air brake system is properly pressurized for immediate dispatch from station
- Pressure switch regulated operation automatically senses low pressure in air system and restores proper pressure, preventing brake lock-up
- No interference with engine mounted air compressor
- Factory set PSI actuation points: 75 “On”, 95 “Off” with Adjustment differential 20 PSI
- Sealed ball bearings for long service life
- Compact size
- 2 year warranty
Specifications
PSI | 100 |
Input Voltage | 12 |
Orientation | Horizontal |
Input | 12 Vdc @ 11 Amps Max |
Output | .30 SCFM @ 80 PSI; .35 SCFM @ 60 PSI |
Warranty | 2 Year |
Weight | 6 Lbs |
Motor Type | Perm. Magnet .10 HP |
Pressure Switch | Adjustable Set-Point; Factory Set To 75 PSI Cut-In, 95 PSI Cut-Out |
There are no contributions yet.